Apakškonstrukcija
Designed for flat roof construction.Color - blackMaterial - PVCDimensions - 20 cm x 1.4 cm x 1.4 cmIn a package of 100 pcs..
0.36€
Ex Tax:0.30€
To compensate for different roof skirting heightsArticle: 94701-02..
0.58€
Ex Tax:0.48€
Sewer openingsCompatible with other systems on the marketMade of plasticAvailable RAIL 40Available in blackArticle number: 94640-06..
0.58€
Ex Tax:0.48€
To compensate for different roof skirting heightsArticle number: 94702-05..
0.79€
Ex Tax:0.65€
-18 %
SpecificationsDimensions in mm: L: 400 mm B: 400 mm H: 330 mmWeight: 30 kgYour AdvantagesHigher water resistanceCan be laid indoors or outdoorsBoth fixed and suspended laying possibleHigher mechanical stabilityExtremely resistant to difficult climatic conditionsPotential service life of up to 25 yea..
0.85€ 1.03€
Ex Tax:0.70€
-14 %
SpecificationsDimensions in mm: L: 400 mm B: 400 mm H: 330 mmWeight: 30 kgYour AdvantagesHigher water resistanceCan be laid indoors or outdoorsBoth fixed and suspended laying possibleHigher mechanical stabilityExtremely resistant to difficult climatic conditionsPotential service life of up to 25 yea..
0.85€ 0.98€
Ex Tax:0.70€
-22 %
SpecificationsDimensions in mm: L: 380 mm B: 380 mm H: 240 mmWeight: 38 kgYour AdvantagesDoubly insulated solar cableCan be laid indoors or outdoorsBoth fixed and suspended laying possibleExtremely resistant to difficult climatic conditionsPotential service life of up to 25 years..
0.97€ 1.23€
Ex Tax:0.80€
The simplest form of profile mountingDensity when screwed through EPDM rubberInclusion in the lower channel of RAIL through standardizationAvailable as a set (Trapez II with RAIL: 1x RAIL 40, 2x Trapez II)Article number: 13202-01..
1.56€
Ex Tax:1.29€
Easy to screw on from aboveOnly one tool is needed: TX 40Accidental rotation during assembly is preventedWhen disassembling, the entire clamp rises offAlso available in black anodizedFrame height 30 - 50 mm, including earthing pin for equipotential bondingEasy operation due to compact designArticle ..
1.62€
Ex Tax:1.34€
Easy to screw on from aboveOnly one tool is needed: TX 40For frame height 30 - 50 mmAccidental rotation during assembly is preventedWhen disassembling, the entire clamp rises offAlso available in black anodizedEasy operation due to compact designArticle number: 91112-00..
1.62€
Ex Tax:1.34€
Made of EPDMPower transmission to the outer shell of the roofIt is glued under the floor railCase number: 25101-200..
1.84€
Ex Tax:1.52€
Laminated aluminum on the bottom to prevent plasticizers from escaping on the plastic roofMade of EPDMPower transmission to the outer shell of the roofIt is glued under the floor railArticle number: 25102-200..
2.12€
Ex Tax:1.75€
Easy to screw on from aboveOnly one tool is needed: TX 40Fix the ballast stone to the ground railFree positioning / movement of the jaw in the screw channel before fixingArticle number: 21106-60..
2.18€
Ex Tax:1.80€
Addition to the SL Plan hanging screw setSealing plate includedFor optimal density on bitumen roofsSelf-adhesiveArticle number: 23201-03..
2.27€
Ex Tax:1.88€
Easy to screw on from aboveOnly one tool is needed: TX 40Accidental rotation during assembly is preventedWhen disassembling, the entire clamp rises offAlso available in black anodizedFrame height 30 - 50 mm, including earthing pin for equipotential bondingEasy operation due to compact designArticle ..
2.50€
Ex Tax:2.07€
Easy to screw on from aboveOnly one tool is needed: TX 40For frame height 30 - 50 mmAccidental rotation during assembly is preventedWhen disassembling, the entire clamp rises offAlso available in black anodizedEasy operation due to compact designArticle number: 91112-00..
2.50€
Ex Tax:2.07€
Easy to screw on from aboveOnly one tool is needed: TX 40For positive and non-positive connection of several floor railsNecessary 2 connectors for one conection placeArticle number: 21105-00..
2.71€
Ex Tax:2.24€
Stepless adjustment according to roof geometryDensity when screwed through EPDM rubberFor horizontal arrangement of modulesArticle number: 11201-01..
3.38€
Ex Tax:2.79€
Easy to screw from aboveOnly one tool required: TX 40Lightning current carrying capacity is givenSimple 90 ° cross connection of RAILsFor connecting the 8.5 to the lower 10.5 grooveArticle number: 91202-00..
4.01€
Ex Tax:3.31€
Easy to screw on from aboveWith integrated plastic gasket for optional mounting rails for sliding mounting to compensate for thermal expansionBecause the Trapez IV rests directly on the protruding bead, the greatest possible distance to the water-bearing layerExtra seal by screwing on from above to ..
4.01€
Ex Tax:3.31€
Easy to screw on from aboveBecause the Trapez IV rests directly on the protruding bead, the greatest possible distance to the water-bearing layerExtra seal by screwing on from above to prevent water from entering the roofThanks to the increased contact surface, more forces can be transmitted through..
4.01€
Ex Tax:3.31€
Easy to screw on from aboveOnly one tool is needed: TX 40Available in black anodizedCompatible with other profiles on the marketThe easiest and fastest RAIL connectionFor all profile sizes, with static parameters for the respective RAILArticle number: 81140-05..
4.46€
Ex Tax:3.69€
Quick and easy assembly with just one toolCombination with cross connector for vertical mounting Recommendation:Suitable for titanium zinc, folded sheet metal and folded sheet steel roofsUnsuitable for copper roofsCan only be used for RAILs up to 4350 mm in lengthNumber: 11401-01..
4.67€
Ex Tax:3.86€
Easy to screw on from aboveOnly one tool is needed: TX 40For fixing wind deflector platesIt is attached to the floor railArticle number: 21104-00..
4.67€
Ex Tax:3.86€
Easy to screw on from aboveThe maximum possible distance to the water-bearing layer based on the protruding beadAdditional sealing by screwing from aboveThe profile integrates a screw channel for system connectionDensity when screwed through EPDM rubberArticle number: 11205-03..
5.23€
Ex Tax:4.32€
For connecting module modules without potentially interfering external structureItem ID:
81140-02..
5.34€
Ex Tax:4.41€
Quick and easy assembly with just one toolCombination with cross connector for vertical mountingRecommendation:Suitable for titanium zinc, folded sheet metal and folded sheet steel roofsSuitable for copper roofsCan only be used for rails up to 4350 mm in lengthArticle number: 11401-03..
5.72€
Ex Tax:4.73€
Easy to screw on from aboveOnly one tool is needed: TX 40Available in black anodizedCompatible with other profiles on the marketThe easiest and fastest RAIL connectionFor all profile sizes, with static parameters for the respective RAILArticle number: 81140-05..
6.10€
Ex Tax:5.04€
Universal profile holder for RAIL support railsEPDM rubber and pressure cap to protect and maintain the sealCan be screwed into a wooden structureArticle number: 23310-200..
6.34€
Ex Tax:5.24€
Easy to screw on from aboveOnly one tool is needed: TX 40Tension-free assembly of the module thanks to swivel bearingsFor all module widths due to the mobility of the holder (on rails)Lower center of the FLA holder for long side clampsSwivel on the holder plate to cover different angles of fall with..
6.56€
Ex Tax:5.42€
Easy to screw on from aboveOnly one tool is needed: TX 40Tension-free assembly of the module thanks to swivel bearingsFor all module widths due to the mobility of the holder (on rails)Below the FLA holder for long side clampingHolder for 10 ° and 15 ° systems as well as south and east / westFor comb..
6.90€
Ex Tax:5.70€
Quick and easy assembly with just one toolCombination with cross connector for vertical mountingRecommendation:Suitable for titanium zinc, folded sheet metal and folded sheet steel roofsNot suitable for copper roofsCan only be used for rails up to 4350 mm in lengthArticle number: 11401-05..
7.08€
Ex Tax:5.85€
Easy to screw on from aboveOnly one tool is needed: TX 40It is possible to clamp the module on the wide and long edgesFor tension-free module mountingAs a holder at the top for the southern or eastern / western system and for a slope of 10 ° or 15 °The holder is rotatedWith two screw channelsWith du..
8.07€
Ex Tax:6.67€
Easy to screw on from aboveOnly one tool is needed: TX 40It is possible to clamp the module on the wide and long edgesFor tension-free module mountingAs a holder at the top for the southern or eastern / western system and for a slope of 10 ° or 15 °The holder is rotatedWith two screw channelsProven ..
8.19€
Ex Tax:6.77€
Universal profile holder for RAIL support railsEPDM rubber and pressure cap to protect and maintain the sealCan be screwed into a wooden structureArticle number: 23312-200..
8.32€
Ex Tax:6.88€
Balanced load distributionThe highest impermeability to bitumen (shingles) roofsArticle number: 23201-00..
8.68€
Ex Tax:7.17€
Easy to screw on from aboveOnly one tool is needed: TX 40It is possible to clamp the module on the wide and long edgesFor tension-free module mountingAs a holder at the top for the southern or eastern / western system and for a slope of 10 ° or 15 °The holder is rotatedWith two screw channelsProven ..
8.93€
Ex Tax:7.38€
Universal profile holder for RAIL support railsEPDM rubber and pressure cap to protect and maintain the sealCan be screwed into a wooden structureArticle number: 23312-300..
9.16€
Ex Tax:7.57€
In Stock Riga
Easy to screw on from aboveOnly one tool is needed: TX 40It is possible to clamp the module on the wide and long edgesFor tension-free module mountingAs a holder at the top for the southern or eastern / western system and for a slope of 10 ° or 15 °The holder is rotatedWith two screw channelsWith du..
9.62€
Ex Tax:7.95€
Compression screw with TX 40The height of the rail is adjustable using a combination of clampsProven and simple suspension technologyHighest possible compatibility for conventional tiled roofsCheap and reliable universalAdaptable to the roof using spacersArticle number: 13145-01..
20.53€
Ex Tax:16.97€
Convenient foot height adjustment from 35 to 55 mmEasily adjustable height even after thatNo gasket requiredCan be screwed on narrow straps (eg nail ties)Just hang it and fix itDue to the larger distance, 6 screws can be usedExtremely flexible as it can be moved to the sideMaximum horizontal offset ..
20.53€
Ex Tax:16.97€
Ridge connector for fixing flat roof structures above the ridgeEasy installation with self-drilling screws (included)Thanks to the hinge connection, it can be adjusted to any roof pitchArticle number: 23401-00..
26.70€
Ex Tax:22.07€
Deeper screw channel (only one screw length / claw height required)
Compatible with other systems on the marketDifferent lengths and anodized in black availableOptimized for retaining claw, 100% compatible with roof hooks
Simple handling: lies comfortably in the hand, easy to stack
..
35.62€
Ex Tax:29.44€
▪ The extruded profile is used to attach the FLA holder above and below▪ Allows the FLA holder to be moved and aligned lengthways at the top and bottom▪ Can be combined with the building protection mats item no. 25101-200 and 25102-200 on the underside to apply force to the roof claddingItem number:..
49.25€
Ex Tax:40.70€
Drive the wind over the solar modulesDo not allow the solar modules to riseLength 2950 mmArticle number: 21207-2280..
56.27€
Ex Tax:46.50€
For filling with ballast stones depending on the layout of the ballast planPosition on the lower extension of the floor railAdjustable sheet length to cover different module lengthsArticle number: 22101-00..
65.70€
Ex Tax:54.30€
-9 %
SpecificationsDimensions in mm: L: 380 mm B: 380 mm H: 240 mmWeight: 38 kgYour AdvantagesDoubly insulated solar cableCan be laid indoors or outdoorsBoth fixed and suspended laying possibleExtremely resistant to difficult climatic conditionsPotential service life of up to 25 years..
453.75€ 496.10€
Ex Tax:375.00€
Hema Rack 24 module, 13,08kWp power construction on ground.Optimal space using;Even for difficult griund;Angle of inclintion 30 degrees;Intended for modules JA Solar 545W.Set of ground microgenerator system includes:Huawei SUN 2000 - 12KTL- M2 inverter - 1 pcs;Huawei WLAN Dongle FE - 1pcs;Solar modu..
2,352.24€
Ex Tax:1,944.00€
Showing 1 to 50 of 50 (1 Pages)